If your laptop or PC cannot see or connect to a 5 GHz WiFi network, the reason is usually one of these: the WiFi adapter only supports 2.4 GHz, the router is broadcasting on a 5 GHz channel the adapter does not scan, a driver setting is forcing 2.4 GHz, or you are simply too far from the router. This guide helps you find out which one it is, and fix it on Windows 11 and Windows 10.
netsh wlan show drivers. If "Radio types supported" lists 802.11a, 802.11ac or 802.11ax, your adapter normally supports 5 GHz. Then set the router's 5 GHz channel to 36 to 48 or 149 to 161, give the band its own name, and update the WiFi driver.Table of Contents
2.4 GHz vs 5 GHz: why it matters
Most home routers in India, including those from Jio, Airtel and ACT, broadcast on two bands. The 2.4 GHz band reaches further and goes through walls better, but it is slower and crowded. The 5 GHz band is much faster and less crowded, but its range is shorter. That is why your phone may happily use 5 GHz in the same room as the router, while your laptop in the next room falls back to 2.4 GHz.
| Feature | 2.4 GHz | 5 GHz |
|---|---|---|
| Speed | Lower, often under 100 Mbps in real use | Much higher, can exceed 500 Mbps |
| Range | Longer, better through walls | Shorter, weaker through walls |
| Interference | High (neighbours, Bluetooth, microwaves) | Low |
| Adapter support | Every WiFi adapter | Dual-band adapters only |
Step 1: Check if your adapter supports 5 GHz
This is the most important check. Many budget laptops sold before 2018 and some low-cost USB WiFi dongles are 2.4 GHz only. No setting can make them see 5 GHz.
- Press Win + R, type
cmdand press Enter. - Run
netsh wlan show drivers. - Find the line Radio types supported.
- If it lists
802.11a,802.11acor802.11ax, the adapter usually supports 5 GHz. If it shows only802.11b,802.11gand802.11n, it is most likely 2.4 GHz only.
netsh wlan show drivers
To be sure, search for your adapter's exact name (shown under Network adapters in Device Manager) on the chip maker's website and look for "dual-band". On Windows 11 you can also open Settings > Network & internet > Wi-Fi > Hardware properties to see which band you are connected to right now.
Step 2: Check the router's 5 GHz settings
If your adapter supports 5 GHz but the network still does not appear, the router is the next suspect. Log in to its admin page (usually 192.168.1.1 or 192.168.0.1, or the provider's app) and check these settings.
- Make sure 5 GHz is turned on. Some routers ship with only 2.4 GHz enabled, or turn 5 GHz off after a reset.
- Give it a separate name. Rename the bands, for example
Home_2GandHome_5G. With one shared name, Windows may keep choosing 2.4 GHz. - Change the channel. Channels 52 to 144 are DFS channels, and many laptop adapters do not scan them, or wait a long time before using them. Pick a channel from 36 to 48 or 149 to 161.
- Set the country or region correctly. Choose India so the router uses channels that Indian devices expect.
- Try a narrower channel width. If 80 or 160 MHz is unstable, try 40 MHz for testing.
- Check the security mode. Some older adapters cannot join a WPA3-only network. Use WPA2/WPA3 mixed or WPA2-Personal (AES).
Step 3: Change the adapter's band settings
WiFi drivers have advanced options that can block or discourage 5 GHz. They are in the same place on Windows 11 and Windows 10.
- Press Win + X and open Device Manager.
- Expand Network adapters, right-click the WiFi adapter and choose Properties.
- Open the Advanced tab.
- Look for Preferred Band and set it to Prefer 5GHz band, if available.
- Look for Band or Wireless Mode and make sure it is set to Auto or a mode that includes 802.11a/ac/ax. If it says 2.4 GHz only or 802.11b/g, change it.
- Click OK and restart the laptop.
The exact names differ between Intel, Realtek, MediaTek and Qualcomm adapters, so read through the list slowly.
Step 4: Update or roll back the WiFi driver
A wrong or generic driver can hide 5 GHz support. Download the latest WLAN driver for your exact laptop model from the maker's support page, and check Optional updates in Windows Update. If 5 GHz worked before and stopped after an update, open the adapter's Driver tab in Device Manager and click Roll Back Driver. For general driver and power-saving fixes, see our guide on WiFi that keeps disconnecting.
Step 5: Move closer and test
Concrete walls, which are common in Indian homes, weaken 5 GHz a lot. Sit in the same room as the router and scan again. If 5 GHz appears there but not in your work room, the fix is coverage, not settings. A mesh system or a dual-band range extender placed halfway between the router and your desk solves it.
Connecting to a phone hotspot on 5 GHz
Phone hotspots can also use 5 GHz. On many Android phones you can choose the band in the hotspot settings. On iPhone, turning Maximize Compatibility off lets the hotspot use 5 GHz where supported, and turning it on forces 2.4 GHz for older laptops. If your laptop cannot find the hotspot, switch the band and try again.
Your laptop is 2.4 GHz only: what now?
If the adapter does not support 5 GHz, you have two affordable options:
- Dual-band USB WiFi adapter: plug-and-play, often under a thousand rupees for an AC600 or AC1300 model. Choose one with Windows 11 driver support listed on the box or product page.
- Replace the internal WiFi card: many laptops use a removable M.2 card. A service centre can fit a dual-band card such as a Wi-Fi 5 or Wi-Fi 6 model. Some older HP and Lenovo models only accept approved cards, so check first.
No driver or setting can add a radio band that the hardware does not have. Check the adapter first, then the router.
Frequently asked questions
Why can my phone see 5 GHz but my laptop cannot?
Usually because the laptop's WiFi adapter is 2.4 GHz only, or because the router uses a DFS channel that the laptop adapter does not scan. Run netsh wlan show drivers to check the adapter, then set the router to a channel between 36 and 48.
Can I enable 5 GHz with a software update?
Only if the adapter already has 5 GHz hardware and a driver setting is blocking it. A 2.4 GHz-only adapter cannot be upgraded with software. You need a dual-band USB adapter or a new internal card.
Which 5 GHz channel is best in India?
Channels 36 to 48 and 149 to 161 work with the widest range of laptops and avoid DFS waiting times. Pick the one your neighbours use least, which a free WiFi analyser app on your phone can show.
Is 5 GHz always better than 2.4 GHz?
It is faster and less crowded near the router, but 2.4 GHz is better at long range and through thick walls. For a laptop far from the router, a strong 2.4 GHz signal can beat a weak 5 GHz one.
Does this work the same on Windows 10 and Windows 11?
Yes. The netsh command, Device Manager settings and router changes are identical. Windows 11 also shows the connected band under Wi-Fi hardware properties.
Conclusion
When a laptop or PC cannot connect to 5 GHz WiFi, check the adapter first with netsh wlan show drivers. If it supports 5 GHz, fix the router (turn the band on, use a separate name and a non-DFS channel) and set the adapter's preferred band to 5 GHz. If the adapter is 2.4 GHz only, a dual-band USB adapter is the quickest fix. Once connected, you should see a big jump in speed for downloads, video calls and streaming.
Source: Microsoft Support: Fix Wi-Fi connection issues in Windows
Applies to Windows 11 and Windows 10.